Maxim-integrated 78Q8430 Software Driver Manuale Utente Scaricare il pdf (Pagina 46)

78Q8430 Software Driver Development Guidelines UG_8430_004

11 Software Reset

Use the following procedure to reset the QUEs and the MAC:

STEP 1: Set the MCR MACRST bit.

STEP 2: Read the MCR to verify the reset.

Verify that both Tx and Rx are halted (Tx Halt and Rx Halt bits are set). Verify that both Tx and Rx

are disabled (Tx Enable and Rx Enable bits are clear). Verify that the MACRST bit is set.

STEP 3: Write the MCR and clear the MACRST bit.

STEP 4: Release all buffers and reset the state of the driver.

STEP 5: Write the MCR Tx Enable and Rx Enable bits to enable transmit and receive.

46 Rev. 1.0

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53 54

Nessun commento

Maxim-integrated 78Q8430 Software Driver Manuale Utente Pagina 46